Test reports of the control cables

Using the CF880 in practice

A control panel for a saw or other woodworking machine always sounds like a simple application. In principle, it is, but reliability is of paramount importance here because it influences all machine functions. Radii are often large, and in the area of wood or other building materials, the CF880's PVC jacket with its good abrasion properties for avoiding dry dust performs very well. Such systems are often installed worldwide, so a UL approval as well as a reliable service life is required. 
 

Using the CF881 in practice

Where manufacturing technology previously relied on other stones to process stones, today they are processed on industrial production lines using machine tools. Sawing and milling machines, gang saws or block saws are often used in stone processing. The control cables used in the energy chain, which are located in the application, are exposed to fine dust, vibration, stone and tool fragments. It is also a rather dry environment. Cables with a PVC outer jacket are therefore best suited for use in stone processing, as PVC is a highly abrasion-resistant and bending-resistant material. The CF881 control cable is the optimum choice, as the PVC outer jacket enables it to withstand the existing environmental influences and is a favourable alternative to PUR cables, which are not necessary for such dry energy chain applications.
 

Using the CF5 in practice

The CF5 control cable family is available in a huge number of core/cross section combinations. Indoor cranes very often use 1.5mm and 2.5mm cross sections to supply buttons, limit switches, motors, or even simple lamps with energy. The long travels in the hall, which can be more than 80m, are demanding. The short pitch length and cores wound in bundles promote a long service life. However, dirt from dust and exhaust fumes also affect the cables in the area of the hall roof and this is where the abrasion-resistant, oil-resistant outer jacket shines.
 

Use of the CF891 in practice

The aim of the test was to determine the service life of the chainflex control cable. The CF891 must be able to reliably withstand continuous movement, for example in machine tools or processing machines. In addition, use in such machines often means that the cable comes into contact with oils. In terms of oil resistance, the outer jacket of the CF891, iguPUR, is particularly noteworthy. This jacket material was specially developed by igus for machine tools. This outer jacket in combination with a tested service life of 14.5 million double strokes makes this control cable a reliable choice for your machine.

Use of the CF9 in practice

The test assessed the chainflex cable service life at extremely low temperatures. Systems in outdoor applications need cold-resistant cables. It is precisely the low temperatures that affect the material – specifically, the outer jacket material. They occur at such locations as ports where cables are continuously exposed to harsh environmental conditions. Seawater, large temperature differences and precipitation require the installed cables to be weatherproof, UV-resistant and robust.